中文版
Back Products Series

Hot Keywords:

RCBO, Residual Current Circuit Breaker with Overcurrent Protection, RCCB, Residual Current Circuit Breaker, Universal terminal block, Al/Cu terminal block, aluminum clamp, Smoke alarm, Smoke detector, Smoke sensor
RCBO HSM1-2A type A 10kA

RCBO HSM1-2A type A 10kA

RCBO HSM1-2A type A 10kA

    Share: 

The HSM1 series 10kA type A 1P+N & 3P+N RCBOs (Residual current operated circuit breaker with integral overcurrent protection ) is

the perfect solution for a complete

protection against overcurrent

and earth fault currents.

In two modules width (36mm) and four modules width(72mm) the series

ensure, at any time and under any

condition, the safety of people,

facilities and related equipment.

Description

HSM1 series RCBO compliant to product standard IEC/EN 61009-1, IEC/EN 61009-2-1 and with the following main technical features:

• Breaking capacity 10 kA;

• Electromagnetic (IEC/EN 61009-1, IEC/EN 61009-2-1;

• Type A and Type AC;

• Sensitivity 10 - 30 - 100 - 300 mA;

• Tripping characteristics B - C;

• Rated current 6/10/13/16/20/25/32/40/50/63 A;


Application benefits:

• Supply possible both from top and bottom;

• Fork type busbar connection (above and below) up to 16mm²

and cable connection up to 25mm² cables;

• Easy troubleshooting and reduced downtime

for maintenance operations thanks to the earth

fault indicator (blue/red flag on the window);

Technical

Type HSM1-2A HSM1-4A
Standards IEC/EN 61009-1, IEC/EN 61009-2-1;
Certificate KEMA KEUR, CB, CE, UKCA, RoHS
Country of origin CHINA


Electrical

features

Type (wave form of the earth leakage sensed) Type A, Type A[S], Type A[G]
Type AC
Number of poles 1P+N 3P+N
Rated current In A 6, 10, 13, 16, 20, 25, 32, 40, 50, 63 A 6, 10, 13, 16, 20, 25, 32, 40 A
Rated sensitivity IΔn mA 10, 30, 100, 300 mA 30, 100, 300 mA
Rated voltage Ue V 220/230/240 V 380/400/415 V
Operating time Type A / Type AC Instantaneous
Type A[S] 10 ms delay
Type A[G] 40 ms delay
Insulation voltage Ui V 500V AC
Overvoltage category III
Pollution degree 2
Operating voltage of circuit test V 187 - 264 V 230 - 485 V
Rated frequency Hz 50/60 Hz
Rated breaking capacity acc. to IEC/EN 61009-1 Icn A 10,000 A
Rated breaking capacity acc. to IEC/EN 64947-2
(Only referring to short circuit test)
Icu A 15,000 A
Ics A 7,500 A (50%Icu)
Rated residual breaking capacity
acc.to IEC/EN 61009-1
IΔm A 3000 A
Rated impulse withstand voltage (1.2/50) Uimp kV 4 kV
Dielectric test voltage at ind. freq. for 1 min. kV 2.5 kV (50/60Hz, 1 min.)
Thermomagnetic release – characteristics Characteristics B: 3In - 5In
Characteristics C: 5In - 10In
Energy limiting class acc. to EN 61009-1 3
Surge current resistance (wave 8/20) A 3,000 A


Mechanical

features

Housing Insulation group I - II, RAL 7035
Toggle Insulation group II, RAL 5017
Test button Insulation group II, RAL 2000
Contact position indication Green / Red window
Electrical life Operations 4,000 cycles
Mechanical life Operations 10,000 cycles
Protection degree acc. to EN 60529 Housing IP4X
Terminals IP2X
Shock resistance acc. to IEC/EN 60068-2-27 25g - 2 shocks - 13ms
Vibration resistance acc. to IEC/EN 60068-2-6 0.1 mm or 1 g - 20 cycles at 5…150…5 Hz
Environmental conditions (damp heat) acc. to IEC/EN 60068-2-30 °C/RH 28 cycles with 55°C/90-96% and 25°C/95-100%
Reference temperature for setting of thermal element °C 30 °C
Ambient temperature (with daily average ≤ +35 °C) °C -25… +40 °C
Storage temperature °C -40… +70 °C
* IEC/EN 60947-2 certificate and test-report are not available at present, the use of these values is the responsibility of the user


Installation

Terminal type Twin-purpose terminal (lift / open-mouthed)
Terminal size for cables bottom / top mm² 25/35 mm²
Terminal size for PIN busbar bottom / top mm² 10/16 mm²
Terminal size for FORK busbar bottom / top mm² M6 - 10/16 mm²
Solid /stranded wiring 1x 1mm² - 35mm²
2 x 1mm² - 16mm² *
Flexible wires with or without ferrules 1x 1mm² - 25mm²
2 x 1mm² - 10mm² *
Tightening torque bottom / top 2 Nm
Stripping length of the cable 10 mm
Mounting On DIN rail EN 60715 (35mm)
by means of mounting clip
Mounting position Any
Connect from Top/bottom terminals
Dimensions (H x W x D) mm 90 x 36 x 72 mm 90 x 72 x 72 mm
Weight kg 0.19 kg 0.42 kg


Package

Packing A
(Individual box)
Quantity pieces 1 1
Dimension (H*W*D) mm 90*40*80 mm 90*78*81 mm
Weight kg 0.2 kg 0.43 kg
Packing B (*A)
(Middle box)
Quantity pieces 6 3
Dimension (H*W*D) mm 255*95*91.2 mm 242*98*89 mm
Weight kg 1.3 kg 1.3 kg
Packing C (*B)
(Master carton)
Quantity pieces 60 30
Dimension (H*W*D) mm 510*275*200 mm 520*255*200 mm
Weight kg 14.5 kg 14.5 kg


Combination with

auxiliary elements

Auxiliary contact NA (yes) NA (yes)
Allarm contact NA (yes) NA (yes)
Shunt trip NA (yes) NA (yes)
Auxiliary contact for bottom fitting NA (yes) NA (yes)
Undervoltage release NA (yes) NA (yes)
Overvoltage release NA (yes) NA (yes)
Motor operating device NA (yes) NA (yes)

Send Inquiry

Please feel free to contact with us at bruce.lee@hiselec.com or filling up an enquiry form instructed at the bottom, You will get an effective response within 24 hours from Our sales representative. Thanks for your valued time with interest!

  • Subject:
  • *Name:
  • *E-mail:
  • Company Name:
  • Tel:
  • Fax:
  • Country:
  • Message:


Address:

Add.: 7/F, Building NO.5, Daziran Jiayuan, Shifu Road, Wenzhou, Zhejiang, China, 325000;

Contacts: Bruce.lee

Tel.: +86-577-8801 9159;

Mob.: +86-188 1519 7570;

Email: bruce.lee@hiselec.com;


Friendlink

Copyright © Huishang Electric Co., Ltd. All rights reserved. | Support by:YIYI | Sitemap | XML

RCBO | RCCB | Al/Cu Universal Terminal Block | Smoke Detector AC Version Smoke Detector DC Version | Support: YIYI

Wechat

Skype

Whatsapp

QQ

Email

Top